页面版权所有: 德州鑫城特种油品有限公司

ICP备案号:鲁ICP备15013172号 | 技术支持:中企动力

DRK-810型深孔极压切削油(黑色金属专用)

概要信息:
DRK-810型深孔极压切削油(黑色金属专用)专门适用于普通碳钢、铸铁等各种材质工件深孔镗的切削加工。
基本信息
详细参数
库存:
0
没有此类产品
产品描述

    本产品针对深孔镗床加工的特点,采用国内先进配方,以合成油精制矿物油为基础,添加多种功能添加剂,用特殊生产工艺精制而成。

    This product for deep hole gun drill processing, using the domestic advanced formula, using synthetic oil refined mineral oil as base, adding a variety of functional additives, special production process and refined

产品特性:

    1.安全性好,对人和环境无不良影响。

    2.优良的防锈性、润滑性和极压性,加工精度高。

    3.本品含有高渗透性润滑剂,降低摩擦阻力及操作负荷。

    4.延长刀模具的使用寿命,减少枪钻头磨损断裂。

    5.粘度合适且长时间保持不变,挥发性小,稳定性高。

    6.油品流动性好,排屑快,清洗性好。

    7.油品抗气雾性能优良,油料消耗较少,使用成本较低。

Products characteristics:

   ● good safety, no adverse effects on people and the environment.● antirust, lubrication and extreme pressure, high precision machining.This product contains high permeability lubricant, reducing friction and the operating load.● extend knife die life, reduce the gun drill wear fracture.● suitable viscosity and long time constant, low volatility, high stability.● oil has good fluidity, fast chip removal, cleaning and good.The excellent performance of anti fog oil, fuel consumption is less, the use of low cost

产品用途:适用于普通碳钢、铸铁等各种材质工件深孔镗的钻孔,镗孔,刮削滚轧加工。

    Product use: machining deep hole gun is applicable to stainless steel, aluminum alloy, steel, cast iron and other materials of drilling, deep hole boring of workpiece. 

注意事项:密封储存,防止日晒、雨淋或混入杂质,严禁与其他油品混用。

包装及储运:200升国标桶包装,净重170公斤/桶。

Note: sealed storage, to prevent the sun, rain or impurities, is strictly prohibited and other oil mixture.

Packing and storage: 200 liters GB drum, net weight 170 kg / barrel.

关键词:
drk-810
WHS-810A硫化切削油深孔镗床专用油德州切削油
上一条
DRK-810B型深孔极压切削油
下一条
DRK-810型硫化切削油